4.Connect the RCA audio cable to the Audio ports of the projector: insert the white plug into the L port and the red plug into the R port. Connect the plug at the other end of the RCA audio cable to the audio output ports of the video source.

5.For S-Video, insert one end of an S-Video cable into the projector’s S-Videoconnector. Insert the other end into the S-video-out port of your video source.

S-Video connector

S-Video cable

 

6.For component video, insert three ends of a BNC cable into the projector’s R/R-Y, G/Y, and B/B-Yports. Insert the opposite ends of the cable into the Y/Video, C/R-Y, and B-Y ports on your component video source. (Don’t insert any of the cable ends into the HD/Sync and VD ports.)

Note: Use a standard BNC cable, which you can purchase from any computer store. The Computer 2/BNC video cable supplied by EPSON as an optional accessory does not work with component video.

Connecting to a Video Source

55