To connect a video source to the projector:

1.Turn off the projector and video source if they are on.

2.If your video source uses a small, round, one-prong composite (RCA) video connector, you’ll need the RCA video cable that comes with the projector. If your video source uses a large, round, four-prong S-Video connector or a BNC type connector, you will need to purchase the appropriate cable or use the cable that came with your video source.

3.For composite video, connect the yellow RCA plug on one end of the RCA video cable to the projector’s Video port. Connect the other yellow RCA plug to the video-out port of your video source.

audio/video cable

54

1 • Setting Up the Projector