2.Connect the other end of the video cable to the laptop’s video (monitor) port.

3.Tighten the screws on all connectors.

Connecting the Mouse and Serial Cables

If you want to use the remote control as a mouse or use the ELP Link IV software, you need to connect the main cable. It provides connectors for:

❐The PS/2 or USB cable (to use the remote control as a mouse)

❐The serial cable (to use the ELP Link IV software)

Refer to this illustration while following the steps below.

Mouse/Com 1 port

PS/2 or USB cable

9-pin serial cable

main cable

30

1 • Setting Up the Projector