Installing the Software

ELP Link IV software can be used with the following operating systems:

❐Windows 3.x

❐Windows 95 or 98

❐Windows NT 3.51 or 4.0

❐Macintosh OS System 7.5.1 and OS System 8.x.

Connecting Needed Cables

Before installing the ELP Link IV software, make sure the projector is properly connected to your computer with the main and serial cables. See Chapter 1 for instructions.

Installing the Software for Windows

Follow these steps to install ELP Link IV for Windows 3.x,

Windows 95 or 98, or Windows NT:

1.Turn on your computer and start Windows.

2.Insert the Projector Software CD into your CD-ROM drive.

3.If you have Windows 95, 98, or NT, the ELP Link IV Setup window should open automatically. If if doesn’t, click Start and then Run. The Run dialog box appears. Type E:\SETUP (substitute the correct drive letter for your CD-ROM drive if it is not E), then press Enter or click OK.

102

4 • Using ELP Link IV