The settings available in each of the menus are described below.
Note: Some options are limited to being enabled (turned on) or disabled (turned off). Enabled options are indicated by a green light. Disabled options are blank.
Video Menu (Image Source = Computer)
The Video menu lets you make adjustments to the projected image. The following options are available when the image source is Computer 1 or Computer 2.
Note: The computer must be connected and operating, and the image source on the projector must be set to Computer 1 or Computer 2 for you to access these menu options.
Menu item | Description |
|
|
Position | Select this item and then press the right arrow button (control panel) |
| or press right on the Enter button (remote control) to enter the screen |
| position adjustment mode. Then use the Enter button (remote |
| control) or up, down, left, and right buttons (control panel) to move |
| the screen position in the corresponding direction. |
| When you finish making adjustments, press the Esc button to return |
| to the Video menu. |
Tracking | Matches the projector’s internal clock to various computer graphic |
| signals. Adjust this setting to remove vertical lines from the image. |
Sync | Synchronizes with the tracking signal sent from the computer. Adjust |
| this setting to correct fuzziness or screen flicker. |
|
|
88 | 3 • Using the Projector Menus |