Connecting to a PowerBook
Your PowerBook must have
To connect the projector to your PowerBook, you need to:
❐Connect the projector video cable
❐Connect the mouse and/or serial cable (if you want to use the remote control as a mouse or use the ELP Link IV software)
❐Connect the audio cable (if you’ll be projecting with audio)
Follow the steps in each section for the cables you need to connect. Before beginning, turn off the projector and computer if they are on.
Note: PowerBook configurations vary, so the location of your computer’s ports may not match the illustrations. See your PowerBook manual for the port locations if necessary.
Connecting to a Computer | 43 |