Upgrading Your Memory

Your ActionNote has 8MB of memory on the system board, and a socket in which you can install a 4, 8, or 16MB snap-in memory module.

If you are using Instant On or Save to Disk, you will need to rerun the PHDISK utility after you have changed the amount of memory. See Chapter 6 for more information.

CAUTION

A memory module is delicate and needs careful handling. If you don’t fee/ confident installing it yourself, ask your Authorized EPSON Servicer for assistance.

Removing a Memory Module

Your computer may have a memory module installed. If you want to replace it with a higher-capacity module, follow the steps below to remove the original memory module. If it doesn’t have a module installed, see the next section, “Installing a Memory Module,” to install one.

1.Remove the keyboard as described in the previous section.

Upgrading Internal Components 5-11