Contact your Authorized EPSON Servicer or the EPSON Connection for assistance.
An External Pointing Device Doesn’t WorkYour ActionPoint touchpad is disabled when you connect a device to the external keyboard/mouse port and use it before you use the touchpad. If you used the touchpad first, turn the computer off and then on.
If you connect a pointing device to the serial port (rather than the mouse port), however, you must disable the touchpad with the Setup program. See “Changing the Settings” in Chapter 6 for instructions.
If you have disabled the pointing device in Setup, make sure your new pointing device driver is installed and loaded. See the documentation that came with your device for instructions.
Make sure you connected the device to the external keyboard/mouse port or serial port before you turned on the computer, as described in “Using an External Keyboard, Mouse, or Other Pointing Device” in Appendix B of the online manual.