Ctrl Alt Del.)
Starting Setup

To start Setup, turn on your computer. (If your computer is already on, save any files you’ve been working on, then restart your computer using

During power-on diagnostics you see the following prompt:

Press F8 to run SETUP

As soon as you see this message, press F8.

If you do not press F8 within 5 seconds, the computer loads the operating system. You can restart the computer and try again.

Changing the Settings

When the computer starts Setup, you see the Page 1 screen, which displays your computer’s memory configuration in addition to other settings you can change. Base memory plus extended memory is total system memory.

Use the right, left, down, and up arrow keys to move the cursor from option to option. Once you have highlighted an option you want to change, press the + or - key or the spacebar to scroll through the settings and select the one you want. Press PgDn or PgUp to go to the next or previous Setup screen.

6-4Customizing Your Computer