Windows System Requirements

To use your printer and its software with a PC, your system should have:

■An IBM® compatible PC with at least a 386/25 (for Windows 3.1x), 486/25 MHz (for Windows 95 or Windows NT 4.0), or 486/66 MHz (for Windows 98) processor

■DOS, Microsoft® Windows 3.1, Windows 95, Windows 98, or Windows NT 4.0

■At least 16MB of RAM (32MB for Windows 95 or 98 or 64MB for Windows NT 4.0 recommended)

■At least 50MB of free hard disk space (100MB recommended)

■VGA, Super VGA, or better display adapter and monitor

■Double-speed (2x) CD-ROM drive (quad [4x] or faster recommended) for installing the printer software

■For parallel connection, a high-speed, bidirectional, IEEE-1284 compliant parallel cable (6 to 10 feet long); the cable must have a D-SUB, 25-pin, male connector for your computer and a 36-pin, Centronics® compatible connector for the printer.

For USB connection to a computer running Windows 98 with a Windows 98 compliant USB port, a shielded USB “AB” interface cable, from Series A (computer) to Series B (printer), up to 6.5 ft. (2.0 meters) long.

Using an improperly shielded USB cable—especially a cable more than 6.5 ft. (2.0 meters) long—may cause the printer to malfunction.

4