Settings | Options |
|
|
Software | ESC/P 2, IBM X24E |
Specifies the type of control codes you want |
|
to use to control the printer. If you select |
|
ESC/P 2, the printer emulates an EPSON |
|
ESC/P 2 printer. If you select IBM X24E, the |
|
printer operates as an IBM Proprinter™ X24E. |
|
If possible, select EPSON ESC/P 2 in your |
|
application programs. This will allow you to |
|
use the most advanced font and graphics |
|
handling available. |
|
|
|
Auto CR (IBM mode only) | Off, On |
Available when you select IBM X24E |
|
emulation as the Software setting. If Auto CR |
|
is on, the printer performs a |
|
| |
position exceeds the right margin. If this is |
|
off, the printer does not print characters |
|
beyond the right margin, and does not |
|
perform a linewrap until it receives a CR |
|
command. |
|
|
|
AGM (IBM mode only) | Off, On |
Available when you select IBM X24E |
|
emulation as the Software setting. When |
|
AGM is on, the printer can use |
|
| |
|
|
Auto line feed | Off, On |
When the Auto line feed feature is on, each |
|
carriage return (CR) code is accompanied by a |
|
line feed (LF) code. If your printed text is |
|
unexpectedly |
|
to Off. If text lines print on top of each other, |
|
set it to On. |
|
|
|
0 slash | 0, 0 with slash |
The zero character with a slash allows you to |
|
easily distinguish between an uppercase |
|
letter “O” and a zero. |
|
|
|
33