3.After installing the utility, type

C:\EPCALIB2 (where C is your hard disk drive letter). Then press Enter. The following window appears:

4.Make sure EPSON Stylus COLOR

900 is selected. Click Next, then follow the directions on the screen to align the print head.

Aligning the Print Head Using the Control Panel Buttons

If you cannot use the print head alignment utility program that came with your printer, follow these steps to align the print head.

1.Make sure that letter-size or A4-size paper is loaded in the sheet feeder.

2.While holding down the R cleaning button, press the P power button to turn on the printer. Then release both buttons.

3.The S paper out light flashes for about three seconds. While it is flashing, press the E load/eject button.

The printer prints a sheet of instructions in English, French, German, Italian, Spanish, and Portuguese explaining how to align the print heads. Follow these instructions.

If the E load/eject button isn’t pressed while the S paper out light is flashing, the printer enters default-setting mode. If this happens, turn off the printer and repeat steps 2 and 3.

4.After aligning the print head, turn off the printer to exit print head alignment mode.

37