Epson Action Laser SelecType options, The SelecType Control Panel, In SelecType mode, hold down the, button for three seconds (until the message

The SelecType Control PanelUse of these buttons is described in more detail in the following sections.CONTINUE/RESETThis button has several uses related to SelecType.

Implementing SelecType changes - After you exit SelecType (with the printer off line), hold down this button for three seconds (until the message RESET appears) to make your SelecType settings take effect.

Initializing SelecType settings to factory defaults - In SelecType mode, hold down the CONTINUE/RESET button for three seconds (until the message I N I T I A L I Z E appears). Then hold down the button for three more seconds (until the message RESET appears) to return all SelecType functions to the factory settings. See the section on initializing SelecType for full details.

CAUTION: This initializing procedure returns all SelecType options to their factory settings, cancelling all changes you have made. It should be used with care.

SET	Use the SET button to select and set
	SelecType options.

Using the Printer 3-11