Using SelecType

4.Press the SET button again to set the emulation.

5.Press the SET button a third time to enter the emulation submenu, where you can change these options:

FONT SOURCE

FONT NUMBER

FORM

SYMBOL

6. Use the

or

button to select a function to change.

Note: This submenu does not work in a loop. Pressing the

button when the first item is displayed or the button when the last item is displayed causes you to exit the emulation submenu and return to the main menu.

7.Press the SET button to activate the option. The function stops blinking, and the option starts blinking.

8. Use the

or

button to move to the option you want to set.

9.Press the SET button. An asterisk (*) appears next to the option, indicating that the new option has been set. The option stops blinking; the function starts blinking.

10.To exit the emulation submenu and return to the main menu,use the or button to take you back to the main menu. The

message EMULATION = HPLJ2* appears.

If you wish to exit SelecType at this point, see the section on exiting SelecType later in this chapter.

Using the Printer

3-15