Epson Action Laser Using the Printer, Turning off the buzzer, SelecType practice example

Using SelecType

SelecType practice example

To better understand how to use SelecType, you may want to try this example.

Turning off the buzzer

This example shows how to turn off the buzzer.

1.Press the SelecType button to enter SelecType. This message appears:

	P A P E R S I Z E = L T R *
2. Press the		button	nine times or simply press the	button once,
	until the BUZZER		= ON* appears in the display. The word
	BUZZER is	blinking.

3.Press the SET button to move to the list of buzzer options. The word ON starts blinking.

4.Press the button to move to the OFF option.

BUZZER = OFF

5.Press the SET button to set the option. The asterisk (*) now appears next to the word OFF. The word BUZZER starts blinking again.

BUZZER = OFF*

Now exit SelecType by pressing the SelecType button. Then hold down the CONTINUE/RESET button for three seconds until RESET appears in the display.

Using the Printer 3-19