Using SelecType

Interface submenu

To enter the interface submenu from the main menu, follow the steps below:

1. Press the

or

button until you see the I/F function in the

display.

 

 

2.Press the SET button to activate the menu option. (The option starts blinking, indicating that it has been activated.)

3.If the I/F function is set to the PARALLEL option, press the button to select the SERIAL option.

4.Press the SET button to set the SERIAL option. An asterisk (*) appears next to SERIAL.

I / F = S E R I A L *

5.Press the SET button a third time to enter the interface submenu, where you can change options for the menu functions listed below. (The SelecType Options section in this chapter describes options for these functions in detail.)

BAUD RATE

PROT

DATA BIT

PARITY

STOP BIT

ROBUST-XON

6. Use the

or

button to move to a function you want to

change.

 

 

Note: This submenu does not work in a loop. Pressing the A button when BAUD RATE is displayed or pressing the button when ROBUST-XONis displayed causes you to exit the submenu and return to the main menu.

3-16 Using the Printer