Epson ActionTower 3000 Computer Type, Enter, press, Enter, Set User Password, Deleting passwords, Delete the User password by pressing, define a password of up to eight characters

If you enable the Password on boot option, you must enter the Supervisor or User password each time you turn on the system. If you do not enable this option but you have defined passwords, you must enter the password each time you start the SETUP program. If both a Supervisor and User password are enabled, SETUP displays options for setting the User password only for users who logged on with a user password.

To specify a User password, you must first specify a Supervisor password. Follow these steps to enter or change a Supervisor password:

1.Select the Set Supervisor Password Option and pressEnter.

2.You see a Set Supervisor Password window. Type the password you want to use, then press Enter. You can define a password of up to eight characters.

3.Type the same password a second time and press Enter. You see a message that your changes have been saved.

4.Press the spacebar. The Supervisor Password is option is now set to Enabled.

To set a User password, select the Set User Password option and follow the steps above.

Deleting passwordsTo delete‘your passwords, follow these steps:i. Set the Password on boot Option to Disabled.

2.Delete the User password by pressing Enter for both the password field and the confirmation field. Don’t type any characters in these fields.

3.Then delete the Supervisor password the same way.

1-16Setting Up Your System