7.Repeat steps 5 and 6 for the other SIMM, if necessary.

8.Replace the rear internal drive bay bracket and secure it to the back panel with the four screws you removed from the back of the computer.

Removing SIMMs

If you need to remove SIMMs from your computer (to install different ones, for example), follow the steps below:

1.Remove the rear internal drive bay bracket as described on page 3-12.2.Set the computer on its side.

3.Use your fingers or a small screwdriver to carefully pull away the tabs that secure the SIMM at each end, as shown below. As you pull away the tabs, the SIMM falls to the side. Remove it from the socket.

3-14 lnstalling and Removing Options