The table below lists the video DRAM DIP chips that are approved for use in your computer.

video DRAM DIP chip types

Manufacturer

Fart number

 

 

 

Goldstar

GM71

C256A-70/80

 

 

 

Fiji

MB81

C256A-70/80

 

 

NMBS

AAA1M204P-70/50

 

 

Toshiba

TC514256AP-7/8

 

 

Samsung

KM44C256BP-7/8

 

 

 

Note that your video memory sockets may not look exactly like the ones shown here. If you’re not sure how to install video memory chips, contact the EPSON Connection and ask for assistance.

1.Locate the video memory sockets on the main system board, shown on page 3-5.

2.If there is an option card in your way, remove it. See page 3-18 for instructions.

Caution

To avoid generating static electricity and damaging the memory chips, ground yourself by touching the metal surface on the inside of the computer’s back panel. Then remain as stationary as possible while you install them.

3.Remove the memory chips from their package and inspect each one. The pins should point inward at slightly less than a 90° angle. If any of the pins are not in this position, use your fingers or small tweezers to gently align them with the other pins. Be careful; the pins are fragile and can break off easily.

Installing and Removing Options

3-19