13
Introduction | 13
•If you use a stand for the printer, make sure it can support at least 43 lb
(20 kg)
•Use only the type of power source indicated on the label.
•Use only the power cord that comes with the printer. Use of another
cord may result in fire or electric shock.
•The printer’s power cord is designed for use with the printer only. Using
it with other equipment may result in fire or electric shock.
•Do not use a damaged or frayed power cord.
•If you use an extension cord with the printer, make sure the total ampere
rating of devices plugged into the extension cord does not exceed the
cord’s ampere rating. Also, make sure the total ampere rating of all
devices plugged into the wall outlet does not exceed the wall outlet’s
ampere rating.
•Do not block or cover the openings in the printer’s case.
•Do not put your hand inside the printer or touch the ink cartridges
during printing.
•Do not move the print head by hand; otherwise you may damage the
printer.
•Do not insert objects through the slots. Take care not to spill liquid on
the printer.
•Do not attempt to service the printer yourself.
•Turn off the printer by pressing the P Power button, unplug the
printer, and refer servicing to qualified service personnel under the
following conditions:
The power cord or plug is damaged; liquid has entered the printer; the
printer has been dropped or the cabinet damaged; the printer does not
operate normally or exhibits a distinct change in performance.
For California customers only:
The lithium batteries in this product contain
Perchlorate Material - special handling may apply,
See www.dtsc.ca.gov/hazardouswaste/perchlorate.
Caution: Always turn
the prin ter off using the
P Power button. When
you press this button,
POWER OFF appears on
the LCD panel and the P
Power light flashes. Do
not unplug the printer or
turn off the power to the
printer until the panel
shuts off and the P
Power light stops
flashing. This ensures
that the print head is
safely capped.