1-20
20 | Setting Up the Printer On a Network
See “Adding the Network Port” on page 21 to create a network port for your
printer.
Mac OS X
1. Make sure that your computer and printer are turned on and that the
printer is connected to the computer.
2. Insert the printer software CD in your CD or DVD drive.
3. Double-click the Epson Stylus Pro 3880 icon.
4. Follow the on-screen instructions to install all necessary software and
register your printer.
5. Double-click the User’s Guide icon to place links to the User’s Guide
and Network Guide on your desktop.
6. If connecting to a network, double-click the Ethernet Utility icon to
install the EpsonNet Configuration utility (located in the EpsonNet
folder under Applications).
7. When you’re done, close the installer and eject the CD. Restart the
Macintosh if prompted.
See “Adding the Network Port” below to create a network port for your
printer.
Note: If you see the
message that the installer
has detected an older
version of EpsonNet
Config on your system,
you must uninstall the old
version before you can
install the new one. To
uninstall, drag the
EpsonNet folder to the
trash. Then reinstall your
printer software.