2-45
Handling Paper and Other Media | 45
15. Press d or u to set the paper feed
amount for the bottom margin area
that is 0.79 or 1.18 inches (2 or 3cm)
from the bottom of the paper (labelled
Bin the illustration to the right). Then
press Enter.
16. Press l and then d to select DRYING TIME, then press r.
17. Press d or u to select the number of seconds (from 1 to 10) that you
want the print head to wait between passes to allow the ink to dry. Then
press Enter to save the setting.
18. When you are finished, press +Cancel/Reset to exit the Menu.
You can also make similar settings using the printer driver software. For
instructions, see page 55 (Macintosh) or page74 (Windows).
Selecting a Paper Configuration
Once you have created a paper configuration, follow these steps to select it
when you are ready to print on that type of paper:
1. Press the Menu r button, then press d until CUSTOM PAPER is
highlighted.
2. Press d to display PAPER NUMBER, then press r.
3. Press d or u to select the configuration number that you want to use. If
you select STANDARD, the printer uses the driver settings. If you select
a number from 1 to 10, the control panel settings override the driver
settings.
4. Press Enter. The configuration number you selected is displayed on
the LCD.
5. Press +Cancel/Reset to exit the menu.