5-94
94 | Maintaining and Transporting the Printer
5. Press d or u to select the type of paper you loaded: PREM.
GLOSSY/LUSTER, P Q INK JET PAPER (Epson Presentation Paper
Matte), or ENHANCED MATTE PAPER (Ultra Premium Presentation
Paper Matte). Then press r.
6. Press Enter to start printing. After printing is complete, the printer
starts aligning the print head.
It takes several minutes to run the head alignment. The printer’s white
beam sensor reads the alignment pattern and adjusts the printer
automatically. Make sure you don’t open the top cover or turn off the
printer during this process.
If you want to verify or fine-tune the alignment process, you can perform a
manual head alignment.
Aligning the print head manually
When you want to use the non-Epson special media, you can perform the
head alignment manually. To perform head alignment manually, follow the
steps below.
1. Press the Menu r button.
2. Press d until HEAD ALIGNMENT is highlighted. Then press r.
3. Press d to select MANUAL. Then press r.
4. Press d to select actual paper thickness value between 0.1 mm and
0.5 mm.
5. Press r to register your value.