2Click the PhotoPC button and click OK. Your pictures appear one-
Click below a picture to display the date and time when the picture was taken. These are accurate only if you connected the camera to your Macintosh and set the clock before taking the picture. (See page
If you see an error message, make sure AppleTalk is inactive, and your port settings are correct. See page
3To transfer all pictures to your Macintosh, click Add All to Gallery. To select pictures individually, click each picture you want to transfer, and then click Add to Gallery. If you select a single picture, EasyPhoto prompts you to name it. You don’t have to wait for all the pictures to appear before you start selecting pictures to transfer.
EasyPhoto displays its progress as it transfers and stores each picture. Small “thumbnail” versions of the images are added to the
new gallery. EasyPhoto labels your pictures with the current date 3 and numbers them in order. After the transfer is finished, you can
NOTE
If the transfer process seems too slow, try increasing your port speed. See pages
4Turn off the camera. The transfer process uses a lot of power, and your batteries can run out quickly.
NOTE
Once you install EasyPhoto and the PhotoPC
Using PhotoPC with Your Macintosh