Epson Digitial Camera Setting the Clock, NOTE, NOTE, 5-2 Using Advanced Features, Follow these steps to set the camera’s clock:, PhotoPC screen. Click the Camera Options button

You can switch between Setup and Controls by clicking on the buttons.

NOTE

You can also access the Camera Controls windows from thePhotoPC screen. Click the Camera Options button.

Drag to customize auto shut-off

Click to change date and time, if necessary

Setting the Clock

If you set the clock, PhotoPC automatically records the correct date and time of your pictures. When you transfer the pictures from the camera to your Macintosh, you can see exactly when each shot was taken.

In order to have the time and date recorded, you need to set the camera’s clock from your Macintosh.

NOTE

After you set it, the PhotoPC clock keeps time accurately until you replace the batteries; at that point you need to connect the camera to your Macintosh and reset the clock.

Follow these steps to set the camera’s clock:

1Connect the camera to your Macintosh and open the Camera Controls window as described on page 5-1.

The Date/Time box shows the current values in your camera’s internal clock. Use the arrow buttons to change these values if necessary.

2Click OK. EasyPhoto updates the date and time in your camera.

5-2Using Advanced Features