To set the shutter speed, follow these steps:
1Connect the camera to your Macintosh as described in Chapter 3 and open the Setup window as described on page
The Shutter Speed slider is set to Auto.
2Drag the slider to the left to reduce the shutter speed, or to the right to increase the shutter speed. The shutter speed range is from 1/30 second to 1/10,000 second.
3When you are finished, click OK.
Adjusting Port Settings
You can use PhotoPC Settings to adjust the computer connection for PhotoPC. You need to adjust these settings if you see an error message when you connect the camera. You may also want to experiment with the speed setting to decrease the time it takes to transfer pictures to your Macintosh.
Drag to set shutter speed
Click to change speed for transferring pictures
Click to change port for camera connection