4Position the module so that the notch is aligned with the rounded corner of the socket.
7Place the socket cover on the camera body and press down until it snaps into place.
rounded corner
notch
5Slide the module into the socket at an angle as shown, pressing along the edge until it clicks into place.
6Press down on the module until it snaps into the retaining clips at the sides of the socket.
retaining clip
8Replace the batteries in the battery compartment and replace the battery cover as described on page
When you take your next picture, the pictures remaining number on the control panel shows your camera’s expanded capacity.
With expanded memory, you may notice a delay between the time you |
|
press the shutter button and when the camera beeps. You can reduce this |
|
delay by pressing the button down halfway, holding it until you’re ready | A |
to take the picture, and then pressing it down the rest of the way. |
Using Optional Accessories