Interface
The following ports can be accessed by removing the cable cover. For
information on how to remove the cable cover and connect video
equipment, s Quick Start Guide .
Name Function
AHDMI input port Inputs video signals from HDMI compatible video
equipment and computers. This projector is compatible
with HDCP
g
signals. s Quick Start Guide
BBNC input port For analog RGB signals from a computer and
component video signals from other video sources.
s Quick Start Guide
CVideo input port For composite video signals from video sources.
s Quick Start Guide
DS-Video input port For S-video signals from video sources. s Quick Start
Guide
Name Function
ECable holder Connection may become defective when a thick heavy
HDMI cable is connected to the HDMI input port. Run
a commercially available cable tie through this holder to
prevent the cable from disconnecting.
FComputer input port For analog RGB signals from a computer and
component video signals from other video sources.
s Quick Start Guide
GPower inlet Connects to the power cable. s Quick Start Guide
HRemote port Connects the optional remote control cable set and
inputs signals from the remote control. When the
remote control cable is plugged into this port, the
remote receiver on the projector is disabled.
IRS-232C port When controlling the projector from a computer,
connect it to the computer with an RS-232C cable. This
port is for control use and should not normally be used.
s p.90
JMonitor Out port Outputs to an external monitor the analog signal from
the computer connected to the Computer input port or
the BNC input port. This is not available for component
video signals or other signals being input to any port
other than the Computer input port or the BNC input
port. s p.85
KLAN port Connects to a LAN cable and then to a network.
s p.84
LDVI-D input port Inputs digital RGB signals from a computer connected
to the DVI-D ouput port. This projector is compatible
with HDCP
g
signals. s Quick Start Guide
Part Names and Functions
10