Epson EB-Z8000WU Resetting the Lamp Hours

E

Replace the lamp cover.

Press the cover against the unit and slide it to the right until it

clicks.

Attention

•

Make sure you install the lamp securely. If the lamp cover is removed, the

lamp turns off automatically as a safety precaution. If the lamp or the

lamp cover is not installed correctly, the lamp does not turn on.

•

This product includes a lamp component that contains mercury (Hg).

Please consult your local regulations regarding disposal or recycling. Do not

dispose of it with normal waste.

Resetting the Lamp Hours

The projector records how long the lamps are turned on and a message

and indicator notify you when it is time to replace the lamp. After

replacing the lamps and turning on the power, the following message is

displayed on the screen and you can reset the lamp-hour counter.

Select Yes, and then press the [Enter] button.

ADisplays the replacement for the lamp 1.

BDisplays the cumulative lamp operating time. If you select Yes and reset

the Lamp Hours, the count for lamp 1 is set to 0H.

Replacing Consumables

76

Contents

Main Notations Used in This Guide General information indications Contents Notations Used in This Guide.......................... 2 Introduction Useful Functions Configuration Menu Troubleshooting Appendix Contents Page Page Projector Features Ease of use when installed on a ceiling mount Centered lens Equipped with electric lens shift, zoom and focus functions Six optional lenses are provided Safety reliablity Large Projection Area and Precise Colors Enhanced security functions Easy to handle Projector Features Part Names and Functions Front/Top The illustration shows a standard zoom lens installed. A B Interface A B C D Rear A B C D E Remote Control Page Page Correcting Distortion in the Projected Image Correcting Distortion with Quick Corner Correcting Distortion in the Projected Image F Correcting Distortion in the Projected Image Changing the Projected Image Automatically Detect Input Signal and Change the Projected Image (Source Search) Switch to the target image by Remote Control Changing the Projected Image Functions for Enhancing Projection Selecting the Projection Quality (Selecting Color Mode) Setting the Auto Iris Hiding the Image Temporarily (Shutter) Freezing the Image (Freeze) Changing the Aspect Ratio Changing methods Changing the Aspect for video equipment images Page Changing the Aspect for computer images Page Page Pointer Function (Pointer) Enlarging Part of the Image (E-Zoom) Limitation of the Number of the Target Projectors when Using Multiple Projectors Page Setting the Remote Control ID Limitation of the Number of the Target Projectors when Using Multiple Projectors Correcting Color for Multiple Projectors (Multi-Screen Color Adjustment) Summary of Correction Procedure Correction Method Page Security Functions Managing Users (Password Protect) Type of Password Protect Setting Password Protect Entering the Password Restricting Button Operation Setting Control Panel Lock Lens Operation Lock Anti-Theft Lock Installing the wire lock Page Page List of Functions Image Menu Page Signal Menu Page Settings Menu Extended Menu Page Network Menu Page Page Info Menu (Display Only) Reset Menu Page Using the Help Problem Solving Reading the Indicators Indicator is lit or flashing red : Lit : Flashing: : Off Indicator is flashing or lit : Lit : Flashing : Off : Varies according to the projector status Page When the Indicators Provide No Help Problems relating to images Problems when projection starts Other problems Problems relating to images Page Page Page Problems when projection starts Other problems Page Page Installation Methods Page Cleaning Cleaning the Projector's Surface Cleaning the Lens Cleaning the Air filter Page Page Replacing Consumables Replacing the Remote Control Batteries Replacing the Lamp Lamp replacement period How to replace the lamp Page Resetting the Lamp Hours Page Page Optional Accessories and Consumables Optional accessories Consumables Notes on Transportation Moving Nearby When Transporting Preparing packaging Notes when packing and transporting Saving a User's Logo Page Screen Size and Projection Distance A B C Connecting a LAN Cable Connecting to an external monitor Removing and Attaching the Projector Lens Unit Removing Page Replace the front cover. Replace the interface cover. Removing and Attaching the Projector Lens Unit Reading Problem Mail Notification Function ESC/VP21 Commands Command List Cable Layouts Serial Connection Communications protocol Page About PJLink Supported Monitor Displays Computer signals (analog RGB) Component Video Composite Video/S-Video Input signal from the HDMI/DVI-D input port Specifications Projector General Specifications Connectors Operating Conditions for the EasyMP Monitor Page Page Glossary Glossary General Notice: SEIKO EPSON CORPORATION 2009. All rights reserved. General Notes A B C D Index N O P Q R Index