Prepare #2 plus-driver in advance.

Removing

Attention
Only remove the lens unit when necessary. If dust or dirt enter the
projector, projection quality deteriorates and it could cause a malfunction.
Try not to touch the lens section with your hand or fingers.
If fingerprints or oils are left on the surface of the lens, projection quality
deteriorates.
If the lens shift has been done, set the lens shift to the center before
replacing the lens unit.
Procedure
A
Remove the interface cover.
ALoosen the fixing screw.
BWhile pulling up the interface cover open switch, pull the interface cover
straight out.
B
Remove the front cover.
ALoosen the two fixing screws.
BLoosen the fixing screw.
CPull the cover straight out.
C
Pinch the lock lever of the lens unit and turn it
counterclockwise.

Removing and Attaching the Projector Lens Unit

86