There are many glass parts and precision components inside the
projector. To prevent damage due to impacts when transporting, handle
the projector as follows.
Moving Nearby
Checking the following points, and then carry carefully by the handles.
•Turn off the power to the projector and disconnect all cables.
•Attach the lens cover to the lens.
•Store the foot.
Caution
Do not carry the projector by one person.
Two people are needed to unpack or carry the projector.
When Transporting
Preparing packaging
After checking the points in "Moving Nearby", prepare the following
and then pack up the projector.
•Remove the lens unit if an option lens, other than the standard
zoom lens, is installed. Attach the standard zoom lens if the projector
has a built-in lens. If the projector does not have a lens, attach the
cap that was on the lens mount when you purchased the projector.
•The vertical and horizontal lens shifts are positioned in the center.
•Fit the protective lens pads that were used at the time of purchase.
Notes when packing and transporting
When packing, use the original packaging materials that were used at
the time of purchase.
If you no longer have the packaging, enclose the projector securely in
buffer material to protect it from shock, and place it into a strong
cardboard container which is clearly labeled as containing fragile
equipment before shipping it.
When shipping the projector, make sure that the carrier company is
equipped to transport fragile equipment, and be sure to notify them
that the contents are fragile.
Notes on Transportation
80