Epson EMP-735 manual 1, 2, 3

23
EMP-735 User’s Guide
Playing Sound from the Video Equipment
The projector has a single built-in speaker with a maximum output of 1 W. To
output the audio of a video equipment from the built-in speaker, connect the
audio output port of the video equipment and the Audio-In port (stereo mini
jack) at the rear of the projector with either of the following commercially-
available audio cables.
• 3.5ø Stereo mini jack audio cable
• 2RCA (L-R)/Stereo mini jack audio (zero impedance) cable
Use the following procedure to adjust the volume of the sound output.
Procedure
1Press the [Menu] button on the
remote control, and then select
"Volume" from the "Audio"
menu.
For details on this operation, refer to
"Using the Configuration Menus".
(p.58)
2Use the [ ] and [ ] buttons to
adjust the volume.
The volume is increased or reduced
each time a button is pressed.
3After making the adjustment, press the [Menu] button to exit
the configuration menu.
Stereo mini jack audio cable
(commercially-available)
To audio output port
To Audio-In port
+
-
+
-
Video
Audio
Setting
User's Logo
Advanced
About
Reset All
Volume
Tone
:
:
Reset
Execute
10
0
[ESC]: Return[ ]: Select [ ]: Adjust [Menu]: Exit
+
-
+
-
Video
Audio
Setting
User's Logo
Advanced
About
Reset All
Volume
Tone
:
:
Reset
Execute
15
0
[ESC]: Return[ ]: Select [ ]: Adjust [Menu]: Exit
Connecting to a Video Source