18
Connecting to a Computer
Use the optional VGA- HD15/BNC PC Cable to make the connection.
See "Appendices: Optional Accessories" p.93
If the Monitor Port is a 5BNC Port
To monitor port
VGA- HD15/BNC PC Cable
(optional)
To [Computer1/Component
Video1]
or [Computer2/Component
Video2] port (blue)
TIP
•After projection starts, change the "Input Signal" setting in the
"Image" menu to either "Computer1" or "Computer2" to match the
signals from the port being used for the connection. p.52
•If more than one external component is connected to the projector,
after projection starts, use the [Computer1/2] button on the remote
control or the [Source] button on the projector's control panel to
select the Computer port as the input source p.34