32
Turning On the Projector
Turn on the power to start projecting images.

Connecting the Power Cable

PROCEDURE
Check that the power is turned off for the projector
and all components connected to the projector.
Connect the computer or other video source to the
projector. p.16, p.22
Remove the lens cover.
Hook your finger under the top of the lens cover and pull to
remove it.
Connect the accessory power cable to the projector.
Check that the power cable connector is facing the same way as
the power inlet on the projector, and then insert the power cable
connector securely into the projector.
Connect the other end of the power cable to an
earthed electrical outlet.
Wait until the Power indicator lights orange.
CAUTION
Be sure to read the separate Safety Instructions/World-Wide Warranty
Terms before projecting images.
1
2
3
4
5
Lit orange
TIP
The projector's control panel and remote control buttons cannot be
operated while the Power indicator is flashing orange.