42
Adjusting the Image Quality
If vertical stripes appear in the projected
computer or RGB video images, and this cannot
be fixed using automatic setup, you will need to
adjust the tracking manually using the
following procedure.
PROCEDURE
Press the [Menu] button on the remote control, and then
select "Tracking" from the "Image" menu.
For details on this operation, refer to "Using the Configuration
Menus". p.66
Press the [ ] and [ ] buttons to set the tracking value
to a value that causes the vertical stripes to
disappear from the image.
The tracking value increases or decreases each time a button is
pressed.
After making the adjustment, press the [Menu] button
to exit the configuration menu.
Adjusting the Tracking
1
2
3
TIP
The image will flash when continuous tracking adjustment is carried
out, but this is normal.