51
Using the Configuration Menu FunctionsUsing the Configuration Menu Functions
List of Functions• The functions in the "Image" menu apart from "Input Signal", "Auto Setup" and "Video Signal" cannot be adjusted while no image signal is being input.
• The functions which appear in the "Image" menu will change depending on the type of input source being used for the image signal. Functions which are not
available in the "Image" menu for a particular input source cannot be adjusted.
"Image" Menu
Computer (Analogue-RGB)/RGB video Sub-menu Function Default
Position Moves the image display position vertically and horizontally.
•Press the [Enter] button on the remote control and make the
adjustment using the display position adjustment screen that
appears.
Depends on
connection
Tracking Adjusts computer images when vertical stripes appear in the
images.
Depends on
connection
Sync. Adjusts computer images when flickering, fuzziness or
interference appear in the images.
•Flickering and fuzziness may also appear when the
brightness, contrast , sharpness or keystone settings are
adjusted.
•You can obtain the best results if you adjust the tracking
first and then adjust the sync.
Depends on
connection
Brightness Adjusts the image brightness. Median value
(0)
Contrast Adjusts the difference between light and shade in the images. Median value
(0)
Sharpness Adjusts the image sharpness. Median value
(0)