84
Maintenance
Replacing Consumables
This section describes how to replace the remote control battery, the lamp
and the air filter.
Use the following type of battery as a replacement.
1 CR2025 lithium battery
PROCEDURE
Remove the battery holder.
While pushing the catch of the battery holder inwards, pull the
battery holder out.
Remove the old battery and insert the new battery.
Check the position of the (+) mark inside the battery holder to
ensure that the battery is inserted the correct way.
Insert the battery holder into the remote control.
Push the battery holder in until it clicks.
Inserting the Battery
CAUTION
Be sure to read the Safety Instructions/World-Wide Warranty Terms
before handling the battery.
1
Catch
2
Old battery
New battery
mark
3
TIP
Dispose of used batteries in accordance with local waste disposal
regulations.