22
Connecting to a Video Source

Projecting Composite Video Images

Use the accessory A/V cable to make the connection.
CAUTION
When connecting the projector to other video sources, take the
following precautions.
•Turn off the power for both the projector and the video source before
connecting them. If the power for either device is on at the time of
connection, damage may result.
•Check the shapes of the cable connectors and the device ports before
making the connections. If you try to force a connector to fit a device
port with a different shape or number of terminals, a malfunction or
damage to the connector or port may result.
•Do not bind the power cable and the connecting cable together. If the
power cable and the connecting cable are bound together, image
interference or errors in operation may result.
To video output port
(yellow)
To [Video] port (yellow)
A/V cable (yellow)
(accessory)
To audio output
port p.25
To [Audio2] port p.25
TIP
If more than one external component is connected to the projector,
after projection starts, press the [S-Video/Video] button on the remote
control or the [Source] button on the projector's control panel until
"Video" is displayed in the projected image. p.34