37
Adjusting the Screen Image
These functions correct and adjust the projected images so that the optimum
images can be obtained.

Adjusting the Image Size (Zoom Function)

The size of the projected image is basically determined by the distance
from the projector to the screen. p.15
The following procedures explain how to adjust the screen image once the
projector itself has been set up.
PROCEDURE

Adjust by turning the zoom ring.

The image can be enlarged in this way to 1.2 times the normal size.

If you would like to enlarge the image further, move the projector

further away from the screen. p.15

Focusing the Screen Image

PROCEDURE

Turn the focus ring to adjust the image focus.

TIP
The E-Zoom function lets you enlarge parts of the image. p.49
Turn to "W" (wide) to
enlarge the images.
Zoom ring
Turn to "T" (tele) to
reduce the images.
Focus ring
TIP
•If the surface of the lens is dirty or misted over as a result of
condensation, it may not be possible to adjust the focus correctly. If
this happens, clean or de-mist the lens. p.77, p.83
•If the projector is positioned outside the normal projecting range of
89–1050 cm (2.9–34.4 ft.), it may not be possible to obtain the correct
focus. If you have trouble obtaining the correct focus, check the
projection distance.