97
List of ESC/VP21 Commands

Command List

When a power ON command is sent to the projector, the power for the
projector turns on. When the projector is in a command ready state, it
returns the "3Ah" (:) code. Furthermore, when command processing is
complete, the projector also returns a ":" code.
The ":" code status can be used to determine whether the projector is ready
or busy. If command processing terminates with an error, an error message
is output and then the ":" code is sent.

Communication Protocol

Item Command
Power ON/OFF ON PWR ON
OFF PWR OFF
Signal selection
Computer1 SOURCE 11
Component Video1 (YCbCr) SOURCE 14
Component Video1 (YPbPr) SOURCE 15
Computer2 SOURCE 21
Component Video2 (YCbCr) SOURCE 24
Component Video2 (YPbPr) SOURCE 25
Video SOURCE 41
S-Video SOURCE 42
A/V Mute ON/OFF ON MUTE ON
OFF MUTE OFF
A/V Mute Selection
Black MSEL 00
Blue MSEL 01
User’s Logo MSEL 02
•Standard baud rate : 9600 bps
•Data length : 8 bits
•Parity : None
•Stop bit : 1 bit
•Flow control : None
•Connector shape : D-Sub 9-pin (male)
•Projector input port : Control (RS-232C)