64
Using the Configuration Menu FunctionsUsing the Configuration Menu Functions
• The "Info" menu shows the setting details for the current image source.
• The "Lamp Hours" item appears as 0H for 0–10 hours, and after that, it appears in units of 1 hour.
"Info" Menu
Computer (Analogue-RGB)/RGB Video/Component video (YCbCr , YPbPr )Video (Composite video , S-Video )Sub-menu Function Default
Lamp
Hours
Displays the cumulative lamp operating time for both "High"
and "Low" brightness operation.
•When the lamp warning period is reached, the display
characters appear in red.
0H
Lamp-
Hours
Reset
Initialises the lamp operating time. When this command is
selected, the cumulative lamp operating time is reset to the
initial default value.
-
Source Displays the input source which is currently being projected.
Input
Signal
Displays the input signal settings.
(Does not appear when the input source is composite video
or S-video.)
Video
Signal
Shows the video signal format.
(Not displayed for computer, RGB video or component
video images)
-
Frequency Displays the horizontal and vertical scanning frequencies.
(Does not appear when the input source is composite video
or S-video.)
-
SYNC
Polarity
Displays the sync polarity.
(Does not appear when the input source is composite video
or S-video.)
-
SYNC
Mode
Displays the sync attributes.
(Does not appear when the input source is composite video
or S-video.)
-
Resolution Displays the input resolution.
(Does not appear when the input source is composite video
or S-video.)
-
Refresh
Rate
Displays the refresh rate.
(Does not appear when the input source is composite video
or S-video.)
-