User’s Guide

Monitoring and Controlling Projectors via a Network (for the EMP-7900)

 

104

 

 

 

3

Connection of the projector will start, and the following
Setup for Network Projector window will be displayed.

 

If "DHCP" is set to "OFF", the settings for the "Network" function in the "Advanced2" menu will be displayed. Make any changes that are necessary.

The projector name can consist of up to 15 single-byte alphanumeric characters. Hyphens(-) also can be used. Note that a numeric-only name can not be set.

4

Once the network settings for the projector have been
completed, click [Mail Notification Setting] and make

 

 

the settings for mail notification such as the

 

notification destinations.

 

 

 

 

 

 

5

The following Setup of mailing functions window will
be displayed.

 

The following table shows the setting details for each item.

Mail

Set to "ON" to use the mail notification function.

Notification

 

 

 

function

 

 

 

 

 

IP addressg of

Specify an IP address of the SMTP server.

SMTP server

You can enter numbers from 0 to 255 in each field of the

 

IP address. However, the following IP address cannot be

 

used.

 

 

 

127.x.x.x, 224.0.0.0 to 255.255.255.255

 

(where x is a number between 0-255)

 

 

When you change a port number of the SMTP server,

 

specify this port number. The default value is "25".

 

You can enter a valid number from 1 to 65535.

 

 

Destination

Specify the destination address of the notification mail.

address

Up to three destinations can be set. You can enter up to

1/2/3

53 single-byte alphanumeric characters.

 

The address you have set as "Destination address 1" is

 

also used as the source address.

 

 

 

Setting a

Use this to select the events that cause a mail notification

Notification

to be sent when a problem or warning occurs with the

Event

projector.

 

 

 

You can select one or more of the following.

 

• Internal error

• Fan related error.

• Sensor error

 

• Lamp timer failure • Lamp out

• Lamp cover is

 

open

 

 

•Internal temperature error

•High-speed cooling in progress

• Lamp replacement notification •No-signal