Epson EMP-7900 Height Correction, viewing the projected images, command in the "Setting" menu, right, or press the [ ] or [ ] buttons on the

User’s Guide

Adjusting the Screen Image 48

Height Correction

When Automatic keystone correction and horizontal correction is carried out, the height of the projected images will become shorter. Use the height correction function to adjust the height of the projection area.

The height correction function is accessible from the configuration menu. This cannot be set when vertical correction is carried out.

PROCEDURE

1	Press the [Menu] button on either the remote control
	or the projector's control panel. Then select "Height"
	from the "H/V-Keystone" sub-item of the "Keystone"
	command in the "Setting" menu.
	For details, refer to "Using the Configuration Menus"									p.96
		Video				Keystone
		Audio
		Effect	Auto Keystone:		ON			OFF
		Setting	V-Keystone	:	32
							-		+
		User's Logo	H-Keystone	:	0
							-		+
		Advanced1	Height	:	0
							-		+
		Advanced2
		About
		Reset All

2	Tilt the [ ] button on the remote control to the left or
	right, or press the [ ] or [ ] buttons on the
	projector's control panel to correct the height while
	viewing the projected images.

	Video						Keystone
	Audio
	Effect			Auto Keystone:		ON			OFF
	Setting			V-Keystone	:	32		-			+
	User's Logo			H-Keystone	:	0		-			+
	Advanced1			Height	:	48		-			+
	Advanced2
	About
	Reset All
[ ESC		]:Return [	]:Select [ ]:Adjust							[Menu]:Exit

3	When the adjustment is complete, press the [Menu]
	button on the remote control or the projector's
	control panel to close the configuration menu.

[ ESC ]:Return [ ]:Select [ ]:Adjust [Menu]:Exit