Adjusting the Screen Image

User’s Guide

42

You can correct and adjust the screen images in order to obtain the best possible pictures.

Focusing the Screen Images (Focus Adjustment)

Adjusting the Image Size (Zoom Function)

The size of the projected images is basically determined by the distance

from the projector to the screen.p.16

The following procedures explain how to adjust the screen images once the projector itself has been set up.

TIP

The E-Zoom function can also be used to enlarge parts of the images. p.64

PROCEDURE

Turn the zoom ring on the projector to adjust the image.

If a standard lens or an optional wide zoom lens is fitted, the images can be enlarged in this way to 1.35 times the normal size.

If you would like to enlarge the images further, move the projector further away from the screen.p.16

Turn to "T" to reduce the size

Turn to "W" to increase the size

PROCEDURE

Turn the focus ring to adjust the image focus.

If keystone correction or Sharpness settings have been made, it may not be possible to adjust the focus correctly.

Focus ring

TIP

•If the surface of the lens is dirty or misted over as a result ofcondensation, it may not be possible to adjust the focus correctly. Ifthis happens, clean or de-mist the lens.p.123, p.140

•If using the standard lens or an optional wide zoom lens and the projector is positioned outside the normal projecting range of 77–1113 cm (2.5–36.5 ft.), it may not be possible to obtain the correct focus.

If you have trouble obtaining the correct focus, check the projection distance. If an optional lens is fitted, refer to the documentation for the optional lens for further details.

Zoom ring