User’s Guide

Adjusting the Screen Image

 

43

 

 

 

Adjusting the Image Angle

If the projector is set up so that it is at a horizontal or vertical angle to the screen, adjust as follows.

When projecting from the side of the screen

If the projector cannot be set up directly in front of the screen, you can project images at a horizontal angle to the screen. If keystone distortion appears in the images, you can use the projector's "H-Keystone" and

"Quick Corner" functions to correct this keystone distortion. p.47, p.49

Tilting the projector vertically with respect to the screen

If the images are being projected onto a screen that is higher than the position of the projector, extend the front adjustable foot to tilt the

projector. p.44

Tilting the projector may cause a keystone distortion to the image, but the automatic keystone correction function will automatically corrects the

image distortion. p.46

CAUTION

The maximum downward tilt angle is when the rear adjustable foot is extended to its limit. Do not tilt the projector downward any further than extending the foot.