User’s Guide

Using the Configuration Menu Functions

 

97

 

 

 

TIP

The items appearing in the "Video" menu and the "About" menu will vary depending on the type of input source being projected.

5

Select a setting value.

 

 

 

Tilt the [

] button on the remote control or press the [ ] or [ ]

 

 

button on the projector's control panel to change setting values.

 

For items which are currently set, a appears in green next to

 

the setting. If you tilt the [

] button on the remote control or

 

press the [

] or [

 

] button on the projector's control panel to

 

select an item to be set, the

will appear in orange. After

 

making the selection, press the [Enter] button on the remote

 

control or the [Auto/Enter] button on the projector's control

 

panel to accept the setting. When the setting is accepted, the

 

changes to green.

 

 

 

 

 

 

 

 

Star tup Screen

:

ON

OFF

 

 

 

 

 

 

Prog ressiv e

:

OFF

 

Video

Film/Auto

 

 

Color Adjustment :

 

 

 

 

 

 

 

 

 

 

Color Temp .

RGB

 

Adjust

 

 

 

 

 

 

 

 

 

 

 

 

Rear Proj.

:

ON

OFF

 

 

 

 

 

 

Ceiling

:

ON

OFF

 

 

 

 

 

 

Standb y Mode

:

Network ON

Network OFF

 

 

Language

 

Select

[English]

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Reset

 

Execute

 

 

 

 

TIP

•Sub-menu items which cause another sub-menu to be displayed

when they are selected have after them. If you select such menu items and press the [Enter] button on the remote control or the [Auto/Enter] button on the projector's control panel, you can then change the settings in the next sub-menu which appears.

•Refer to "List of Functions" for details on the functions of eachmenu item. p.78

6

 

Select other menu items in the same way.

 

Repeat steps 2 to 5 to change the settings for other menu items.

 

 

 

 

To return to a previous menu, press the [ESC] button on either

 

 

the remote control or the projector's control panel.

 

 

 

 

 

 

 

 

 

 

7

 

Close the menu.

 

Press the [Menu] button on either the remote control or the

 

 

 

 

projector's control panel.

 

 

 

 

TIP

 

 

 

 

 

 

 

The display position for configuration menus can be set to either the top-left or the bottom-right of the images. If you press the [Menu] button on either the remote control or the projector's control panel twice in succession when displaying a configuration menu, the configuration menu will be displayed in a different position from before. If you would like to change configuration menu settings while checking images, select an appropriate point in the projection and then display the configuration menu.