Disc Playback
Playing a disc and projecting
v1 Press 
to open the disc tray.
A beep sounds and the power comes on. The same operation can be performed using 
on the remote control.
v2 Place the disc in the disc tray with the label facing upwards.
When using 8 cm discs, place the disc in the hollow in the center of the disc tray.
v3 Press 
to close the disc tray.
Depending on the disc inserted, operation is as follows.
Excluding 
: The projection lamp lights automatically, and projection begins.It takes a few seconds from when the lamp lights up until the projected image is brightly projected.
: Press 
to commence audio playback.The projection lamp does not light. The same operation can be performed using 
on the remote control.
When a menu is displayed
QTip When using in high altitude areas of above 1500 m, set the “High Altitude Mode” to “ON”.
The display window during playback
Display window
When playing 
Chapter number |
|
|
| Elapsed playback |
|
|
| time | |
|
|
|
|
When playing 
Track number
When playing 
Track number
Elapsed playback time
When playing 
Track number |
|
|
| Elapsed playback |
|
|
| time | |
When playing |
|
| ||
|
|
| ||
Group number |
|
|
|
| File number | ||
| |||
14