Auto-standby, goodnight timer (Sleep timer) settings

Set to the [Function] position before performing operations

Auto stand-by: When playback has finished or been stopped, or an operation has not been performed for around 3 minutes, the power switches off automatically.

Sleep timer: Once the set time has elapsed, the power switches off automatically. You can prevent unneccesary power being consumed if you fall asleep while watching a movie.

You cannot use auto stand-by and sleep timer at the same time.

Press .

•Each time you press , the display window display changes as follows. Press repeatedly until the desired item is displayed.

Auto stand-by is activated.

After 10 minutes have elapsed, the power switches off.

After 150 minutes have elapsed, the power switches off.

Sleep timer is cancelled.

•If you select something other than "A.STBY ON", auto stand-by is cancelled.

Setting auto stand-by

"A.STBY" flashes approximately 20 seconds before the power switches off.

Changing the sleep timer

Press repeatedly and select the new time.

Checking the sleep timer setting

Once the sleep timer has been set, if you press once, the set time is displayed in the display window.

Canceling the sleep timer

Perform either of the following operations.

Press.

Press repeatedly until "SLEEP OFF" is displayed in the display window.

QTip: • Sleep timer settings are not memorized. If the power is switched off, the sleep timer is canceled.

•When in external video mode, video is switched off automatically if no signal is input and no operations are performed for 30 minutes. This function is performed regardless of the sleep timer settings.

•Auto stand-by cannot be used when in external video mode.

•Auto stand-by does not work with discs that return to the menu once playback has completed.

Operations Advanced

35