Adjusting the audio playback level

Set to the [Function] position before performing operations

The audio of a DVD video may be recorded at a level (volume) which is lower than other kinds of disc. The unit's default setting recognises and plays DVDs at a higher volume. Make the following settings if this difference bothers you.

Press during playback.

Each time you press, the display window display changes as follows. As you listen to the audio being played, press repeatedly until the setting you want is displayed.

Standard

Middle

High (default setting)

QTip: • The setting is only effective whenis played. Even if this setting is changed, the output level from the Optical Audio-Out port does not change.

•This operation can also be performed when stopped or paused.

Adjusting the audio input level of external audio equipment

Set to the [Function] position before

You can adjust the audio input level of equipment connected to the Audio port.

performing operations

 

 

 

1 Press

and switch to the external video mode.

2 Press and hold

 

for approximately 2 seconds.

 

 

Each time you press and hold, the display window display changes as follows.

For normal use (default setting)

Use this setting when the input level from external equipment is too low and the audio is difficult to hear.

42