When using external video modes

Reference

At these timesCheck here.

page

No images appear

• Is the power for the connected equipment turned on?

 

 

Switch on the power to the connected equipment, or start playback

s page 38

 

depending on the playback method for the connected equipment.

 

 

 

 

 

 

 

• When signals have been connected to both the S-Video input port and

 

 

the Video input port, only the S-Video signal is available. If you want

-

 

to watch the image from the equipment connected to the Video input

 

 

 

port, disconnect the cable from the S-Video input port.

 

 

 

 

 

 

"Signal not supported" is

If you cannot project even when the "Video Signal" is set to "Auto" in

 

displayed

the Information menu, set to the signal format appropriate to the

s page 51

 

equipment.

 

 

 

 

 

 

 

 

 

"No signal." is displayed

• Are the cables connected correctly?

s page 37, 38

 

 

 

 

 

 

• Is the power to the connected equipment turned on ?

 

 

Switch on the power to the connected equipment, or start playback

s page 38

 

depending on the playback method for the connected equipment.

 

 

 

 

 

 

 

 

• Press

to switch to DVD.

s page 38

 

 

 

 

 

The signal is distorted

If an extension cable is used, electrical interference may affect the

-

 

signals. Connect amplification equipment and check.

 

 

 

 

 

 

 

Image is truncated (large) or

The unit automatically recognizes and projects the aspect ratio for the

 

small

input signal. If the aspect ratio is not projected correctly, press

 

 

-

 

 

and select the aspect ratio appropriate to the input signal.

 

 

 

 

 

 

Image colors are not right

In the Information menu, set the "Video Signal" to the signal format

s page 51

 

appropriate to the equipment.

 

 

 

 

 

 

 

 

Appendix

55